> How to Connect to Internet
How to connect to Internet
Creating BDCOM Dialer:
In XP Platform:
Click on Start > connect to > show all connection >Create a new
connection>Next>tick on connect to the internet>Setup my connection
manually>connect using my dialup modem>ISP Name BDCOM>Auto hunting number -
0101335 > type user name password and confirm password>Next>Finish.
In Win98 Platform:
My Computer Dial-Up Networking Make new connection Type here: BDCOM. Next
Auto hunting Telephone no like: 0101335, Next finish. Right click on BDCOM
Properties Disable the area code.
Then go to Configure connection: disable the wait for dial tone. Then go to
Option: enable the bring up terminal window after dialing OK. Then go to server
type (Networking): disable all options without Software compression & TCP/IP.Then
go to TCP/IP Settings: enable Specify name server address:
Primary DNS: 18.104.22.168 and Secondary DNS 22.214.171.124 then OK.
Short Cut to desktop: Right click on bdcom Send to desktop as shortcut.
Connect To Internet
Double click the "BDCOM” OR “BDCOM1” icon
Click "Connect" or ’’Dial” button
After a while you will see a black window containing User name:
Type your username here and next line type your password and finally press Enter
When you will see your dialing screen minimized at the bottom taskbar then you
are connected to internet (i.e. you have connected to Internet)
If you want to connect by terminal window then just give one tick to the
properties of the dialer as like below
Click on Start>connect to >right click on BDCOM dialer >click on security>tick
on terminal window box
Then again Click on BDCOM Dialer and Click on Dial
The following Black Screen appears. Type your user name and password.
Finally Click on Done.
E-Mail Prepare, Send & Receive and Eudora configuration
Double click the “Eudora" icon from the BDCOM folder.
From the “Message’’ menu bar click "New Message’’ or click "New Message"
button on the toolbar. A new composition window is displayed now Type the E-mail
address in To field.
Field From has been automatically filled in and can’t be altered.
Press the Tab key or point and click the mouse to move the cursor down to the
Subject field. Typically, would enter some brief text indicating what the
message is about.
Type your mail in the bottom white area
You can attach any file like: MS Word, Excel, Picture etc. Press Ctrl + h or
clicks on attach toolbar, and then select the drive, folder and the file name.
Click "Queue" button. The mail will save in out going box.
Now get connected with BDCOM Online according to previous procedure. When it
is connected click on check mail from toolbar or from file menu. Password might
be asked. Type the same password. Out Queued mail will send Incoming mail if
there is any. At least you will see the message: You have new mail or not.
After sending & receiving your mail you should be disconnected from online.
The bill will count until you disconnect.
Double click on connection Icon. Click on Disconnect.
After disconnect you can read or print your incoming mail. You can delete,
read, print your incoming or out going mail from In Box and Out Box.
If your mail returns to you, you can be sure that the email address is not
correct. In that case- open the mail and click on message menu click on send
again. Correct the address and queue again. Take online connection and try to
send the mail again.
Double click on Eudora Icon>tools >Internet Options >click on getting
started> then fill up the form as like below:
Then click on ok or press enter.
You can change your password using Eudora: Take online connection -Open
Eudora -Special Password- change- type here your current (Present) Password-
Enter Type a new password more than 6 digit (mix up capital & numeric) press
Enter- type new password again and press Enter on Wait. Password will be
Configure Proxy setting to Internet Explorer
Tools > Option > Address: www.bdcom.com
Tools > Option >Connection > Settings >Use a proxy >
Address:proxy.bdcom.com,Port :8080 >